BATH 3000 VOIP to PSTN DialPlan

Hi

Connected Sipura 3000 to my box of the asterisk to have access to the line of the PSTN.

Iam that has difficulty to dial international number via in advance paid service of the card for the telephone.

first I need to dial 18xx xxx number xxxx and to wait for a certain time to dial the required international number without 011. IE to countrycode+number,

the sequence of the dial for the SIP is not supporting the option of W (it hopes) in present asterisk 1.2.3 (I can be incorrect)

Then I came with another solution after the document of bath 3000 of the reading.

the following ones are excellent parameters of the configuration in bath 3000
[Line of the PSTN]< user 3 AuthID de Voip> : calling
[Line of the PSTN]< password of user 3 of Voip> : call123
[Line of the PSTN]< method of Auth of the caller of Voip> : Summary of the HTTP
[Line of the PSTN]< DP of user 3 of Vop> : 3

[Plan 3 of the dial< of the line of the PSTN]> <: 18667235567 P20 > .)

asterisk formed to the trunk of the dail with the IP address of bath 3000, to call and the password call123 of the name of the user

in asterisk the exit routes created the sequence that marked special 95|.

when dial to 95+countrycode+number - I see the asterisk that speaks with the bath the 3000 and dials of 5567 bath 1866 723 but the second of pause 20 is happening.

Déjeme please to know where I am making error or any better solution for this problem

Gracias Adavance

Jay